玻璃直线双边磨边机(20磨头)
Glass straight line double edger (20 Wheels)
产品适用于磨削平板玻璃的双直线平边。粗磨、精磨、抛光一次完成。磨头座滑动采用双直线滚动导轨，双滚珠丝杆传动，以达到稳定移动速度，消除移动间隙，减少阻力与磨损，保证重复定位。PLC控制系统通过界面设定加工参数一次完成加工。传送皮带驱动采用变频电机调速控制，恒功率，恒扭矩输出，平稳可靠。抛光采用气动自动补偿装置。
本产品具有稳重扎实的结构，精确流畅的传动系统，高配置的控制系统以及超大规格的加工能力，适合于家具玻璃及建筑玻璃的加工。
The product is suitable for grinding the straight line double edging of flat glass. Coarse grinding, fine grinding, polishing can be done at one time. Gliding of grinding head holder adopts double straight line rolling glide. Double ball screw rod transmission stabilizes moving speed and eliminates moving gap, reduces resistance and abrasion, and ensures repeated positioning. This product adopts PLC control system. Set parameters via interface and finish processing at one time. The transmission belt drive adopts frequency conversion motor to control speed, constant rule, output and advanced equipment to control. Polishing adopts pneumatic and automatic compensation device.
主要技术参数
Main Technical Parameters
型号 Model 4500T/2500T 1500WD
最小加工面积 Minimum processing size 300300mm 150150mm
加工玻璃厚度 Processing glass thickness 3-28mm 3-12mm
修安全角宽度尺寸 Polishing safety angle width 45 0~1.5mm 45 0~1.5mm
速度范围 Speed range 1000~6500mm/min 1000~6500mm/min
总功率 Total power 52.7KW A:57.9KW B:53.5KW C:53.5KW 52.7KW A:57.9KW B:53.5KW C:53.5KW
钻石轮 Diamond wheel D:2+2 D:2+2
抛光轮 Polishing wheel P:5+5 P:5+5
树脂轮 Resin wheel R:3+3 R:3+3
最小加工宽度尺寸 Minimum processing width 300mm 150mm
倒角宽度尺寸 Chamfer angle width 1~3mm 1~3mm
底边最大磨削量 Maximum bottom margin grinding 5mm(single side) 5mm(single side)
倒角最大磨削量 Maximum chamfer angle grinding 3mm 3mm
滑动磨头组移动速度 Traveling speed of gliding grinding head group 700mm/min 700mm/min
工作台高度 Worktable height 900mm 900mm
气动工作压力 Pneumatic working pressure 0.7Mpa 0.7Mpa
风机风量 Blower capacity 1069m3/h 1069m3/h
水泵排量 Pump capacity 10m3/h(single pump) 10m3/h(single pump)
平行误差 Parallel tolerance of processing glass 0.2mm/m 0.2mm/m
对角线误差 Diagonal tolerance of processing glass 0.5mm/m 0.5mm/m
倒角宽度误差 Chamfer tolerance ≤0.2mm/m ≤0.2mm/m
DSZMT系列/4500T/3000T/2500T/1500WD
磨轮分布图Placement of wheels
DSZM4500T
DSZM3000T
DSZM2500T
DSZM1000Z
DSZM1500WD
